...Lock the cable lock nut and slide the rubber cover over the adjuster. Test ride the bike. If the clutch does not engage exactly where you want it, use the cable adjuster to fine tune where the clutch ...
...lock nut and adjust the cable as short as it will go. Now, remove the derby cover. In the center of the clutch assembly you'll see an adjuster screw and a lock nut. Loosen the lock nut and turn the ...
...lock nut down and reinstall the derby cover. Go back to the cable adjuster and adjust the adjuster back out making the cable longer until you have about an 1/8 inch freeplay at the lever. Lock the ...
lock nut on each cable. Now, adjust the throttle cable first. You want a little freeplay in the throttle grip when you start to turn it. Once you get it adjusted to that point, lock the lock nut. Then
cable adjuster. Loosen the lock nut and turn the ajuster inwards making the cable as short as possible. Now, remove the derby cover. In the center of the clutch assembly, you'll see a screw and a lock
cable. Lock the locknut. Now work the clutch a few times. Does it feel right. If not, you've got something else wrong. If it feels good, replace the cable adjuster cover and the derby cover. Good Luck
Question about 2008 FLHRC 105th Anniversary Road King Classic
...the cable adjuster and turn the adjuster barrel out until you have about 1/8 inch of freeplay in the cable. Tighten the lock nut and replace the rubber bellows. Replace the derby cover. Good Luck ...
...lock nut. Turn the cable adjuster inwards to get as much slack as you can get. Then, remove the derby cover on the primary cover. Take the spring and lock nut out. Turn the clutch adjuster screw as ...
...lock nut down. Replace the derby cover. Then go back to the cable adjuster and turn the adjuster barrel outwards until you have about an eight inch of free travel in the clutch cable. Squeeze the ...
...lock nut . take slack out of cable . hatleytalking.con ...good luck Loosen clutch cable adjuster located on clutch cable on left side of bike near front frame. Make sure lots of slack in cable. Then ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions