Questions & Answers for: Samsung HL cable

Question about HL-R5677W 56" HDTV

1 Answer

...but had pic prior to changing it? Okay, if that was it, try this: the color wheel ***'y has one cable and "ribbon type" cable, correct? Okay, make sure both cables are secured. Secondly, the ...

Ad

Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television

1 Answer

...hdmi connectivity Here goes nothing, I had my computer hooked to the TV for 6 months i kicked the cable acouple of times nothing seriously sending it out of the port, any how, one day i had a

Ad

Question about HLN5065W 50" Rear Projection HDTV-Ready Television

2 Answers

...video service over hdmi Just purchased a Samsung hl61a750; have at&t uverse: connected via hdmi cable; displayed msg 'mode not supported' ; switched to alternate input source via s-video and

Question about HLP4663W 46" Rear Projection HDTV

1 Answer

i just replaCED THE LAMP AND NOW i CAN'T GET A SIGNAL FROM MY CABLE BOX try bypassing the cable box and plug the cable directly into the TV if you have a snowy picture you might have a cable issue. ...

Question about HLN5065W 50" Rear Projection HDTV-Ready Television

2 Answers

Green tinted people We have a Samsung DLP television, just upgraded to Comcast HD cable. When we are going through the tv the images appear to have the correct color tint, but once we switch to the HD

Question about HLR5067WX 50" Rear Projection HDTV

1 Answer

Wanted to try OTA and ditch cable. Unplugged Wanted to try over the air TV and ditch cable. Unplugged charter cable RF cable fron 'Cable' and plugged in RCA amplified antenna to 'AIR' . Looked OK. ...

Question about HLS4676S Television

1 Answer

my tv no have volume If you are using rca cables (red, white, and yellow connectors) then make sure they are completely pushed into the correct input. If you are using S-video, make sure you have an ...

I have a cable box connectin and cannot choose HDMI as a source. I had HDMI as the source for about two years and then something must have changed. I have verified the HDMI cable is not the problem. ...

Question about HLR5064W DLP Projection TV

1 Answer

a problem with the HDMI connection. Could be one of the following: . Poor connection. Make sure the cable is plugged in tightly and that the plugs and sockets are clean. Bad or damaged HDMI cable. Try

Question about HLP5085W 50" Rear Projection HDTV-Ready Television

1 Answer

The TV has sounds but no pictures. Hi there, This problem could be caused by faulty cables. If you are using an HDMI cable, you will need to replace and see if this solves the problem. If you are ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...