Questions & Answers for: c956i

The quick start button does not do anything, however the other programing buttons will start the treadmill. Precor C956i any help? You would need to replace the keypad overlay on the console.

the incline cannot be re set to '0' level ? Treadmill c956l has a whining noise coming from the front when at 3-5 speed

C956i Precor is displaying Error code 44 ? Treatmill stopped running. Precor Error 44, Un-commanded Lift Motion Probable Cause 1. Intermittent or bad connection in the lift position ...

Whining noise from my treadmill 1) LUBE the DECK BELT inmediately, maybe you have a WORN deck replace if is necessary.2) LUBE the rollers bearings3) test the motor bearings and repair  see the ...

how do you replace bearing on a precor 9,25 need to replace bearings on precor 9.25 see the videos: God bless you You-Tube video "wjrVjYe2LYQ" placeholder (do not delete)

precor 965i will not start, power plug good see this video and proceed according. God bless you You-Tube video "N6Yg5S0WML8" placeholder (do not delete)

i have a precor c956i and got error 27 on it, what can i do to resolve probmem? thank you Precor Error 27, Too Much Drive Motor Current Probable Cause 1. The running belt and/or deck are badly worn. 2

precor 956i won't turn on. It was just working. I unplugged it to re-arrange power cord and now it won't power up. see the video attached. God bless you

Motor making loud buzzing noise A motor on one of my precor c956i machines has a loud buzzing sound to it when turned up to higher and higher speeds. It still runs smoothly and stops normally and what

precor c956i shuts off after you start running on it. Works fine if there is not a person on it. It feels a little bit like the belt is slipping. Any suggestions I know the motor checks out fine and ...