Questions & Answers for: c1183 minolta

...c1183... All cables are plugged in. Any help would be appreciated put finger in power socket After machine off/on, the front door must be opened and closed to reset the finisher codes. I had a ...

bizhub 200 fault code c1183 code c1183 Its an elevator ascent/descent motor failure. You didnt by any chance have any thing such as a big box of paper or a trash can sitting under the exit trays did ...

...C1183 of muy Konica Minolta C252 First check the alignment front and rear of the finisher, check the finisher exit guide rollers if the paper is exiting properly, open both rear and the front cover ...

BIZHUB 350 THROWING CODES C1183 AND NOW SHOWS C5351 Just bought this Bizhub 350 off lease and throwing codes C1183 at startup and now it shows C5351...Is this a result of the copier movers jarring ...

C1183 Elevator motor ascent/ descent drive failure ? The elevator tray lower limit sensor (PC13) is not turned ON even after the set period of time has elapsed after the main power switch is set to ON

BIZHUB 350 C1183 MALFUNCTION Hi richard_hutc, It would appear that you have an issue with the finisher/sorter on the side of the machine. Specifically, C-1183 means the elevator motor hasn't ascended ...

c1183 error and service is closed today check if all trays are fitted in place (open/close them). then power off/on

c1183 on konica minolta Output trays hit something!!!!!! someone leave a trash can or boxes under the output trays? Will have to remove the rear access to the finisher and reseat the drive motor assy.

c1183 when power on machine comeout c1183 Did someone leave a trash can or boxes under the output trays? To solve this problem requires removal of the rear cover of the finisher. Then remove the ...

SOLUCIONAR PROBLEMA DEL ERROR C1183 NO QUIERE FUNCIONAR SOLO SALE ERROR C1183 Did someone leave a trash can or boxes under the output trays? To solve this problem requires removal of the rear cover of