...c1183... All cables are plugged in. Any help would be appreciated put finger in power socket After machine off/on, the front door must be opened and closed to reset the finisher codes. I had a ...
...C1183 of muy Konica Minolta C252 First check the alignment front and rear of the finisher, check the finisher exit guide rollers if the paper is exiting properly, open both rear and the front cover ...
Question about bizhub 350 All-In-One Laser Printer
BIZHUB 350 THROWING CODES C1183 AND NOW SHOWS C5351 Just bought this Bizhub 350 off lease and throwing codes C1183 at startup and now it shows C5351...Is this a result of the copier movers jarring ...
C1183 Elevator motor ascent/ descent drive failure ? The elevator tray lower limit sensor (PC13) is not turned ON even after the set period of time has elapsed after the main power switch is set to ON
BIZHUB 350 C1183 MALFUNCTION Hi richard_hutc, It would appear that you have an issue with the finisher/sorter on the side of the machine. Specifically, C-1183 means the elevator motor hasn't ascended ...
Question about Gear 4349163301 for FS-530, FS-522, FS-519, FN-117
c1183 on konica minolta Output trays hit something!!!!!! someone leave a trash can or boxes under the output trays? Will have to remove the rear access to the finisher and reseat the drive motor assy.
bizhub 222 how to open elevator section error C1183 Check the exit sensor on the elevator tray (paper exit unit).
c - 0998 How do you remove the malfunction detected error C-0998? como puedo solucionar me sale error c1183
c1183 when power on machine comeout c1183 Did someone leave a trash can or boxes under the output trays? To solve this problem requires removal of the rear cover of the finisher. Then remove the ...
SOLUCIONAR PROBLEMA DEL ERROR C1183 NO QUIERE FUNCIONAR SOLO SALE ERROR C1183 Did someone leave a trash can or boxes under the output trays? To solve this problem requires removal of the rear cover of
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions