Questions & Answers for: bypass low pressure switch paper

Question about 1993 Suburban

1 Answer

...pressure in the valves. anyone know what to do besides taking it in and spending a small fortune on repairs? get a a/c pressur gauge n make sure ur putting freon in on low side cause it wont go in ...

Ad

Question about 1999 Aurora

1 Answer

...low or high temp or ambient temp sensor.occasionally the temp does drop to 50. thanks Both switches are simple on/off, so you can test with an ohmmeter or just bypass with a paper clip. See your ...

Ad

Question about 1998 Rodeo

1 Answer

...you can bypass the low pressure switch located on or near the receiver dryer it has 2 wires plugged into it take a paper clip and bypass the 2 in the boot and it will run long enough to re charge

Question about 1995 K1500

2 Answers

...bypass the pressure switch using test leads or even a paper clip as this switch can interupt a/c clutch engagement ...it is a high /low switch and can interupt clutch with too high or too low ...

...pressure/low pressure sensor could be out preventing it from engaging due to a bad reading.This can be bypassed for testing only by arcing the wires together with a paper clip the sensor sould be on ...

...Bypass high/low pressure switch in low side line harness with jumper to engage compressor and check. pull the plug from a/c dryer bend a paper clip into u shape, insert paper clip into the wired plug ...

low pressure switch to keep it working? my a/c is cycling all the time and not enough for it to cool, if i use a paper clip to test the low pressure switch it works perfect, and cools like it should..

...low on refrigerant you can bypass the switch by removing the plug and jumping it with a paper clip. Running the system when it is low on R134A would mean it is also low on oil. I recommend adding a ...

...low pressure switch connector. You might try bypassing the low pressure switch with a paper clip in the connector. If that works, you could just leave it bypassed or replace it. Check the continuity ...

Question about 1999 Expedition

1 Answer

...If pressure is good but bypass works, you need a new pressure switch. If pressure is low, charge the system. If pressure and presxure switch are good, please get back to me and I'll do some

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...