Questions & Answers for: GMC S-15 bush 15 4

GMC S-15 CLUTCH PEDAL THE CLUTCH WILL NOT DEPRESS check your slave cylinder which is located on the side of the transmissin

...cutting off fuel flow when fuel pump builds pressure in the system. Good Luck Raz,... check upper bushing in distributor.If you can move the rotor (not rotate,I mean side to side) the bushing is

how to remove crank shaft bolt gmc s 15 i need to replace timing gears on 1988 gmc s 15 2.5 l dont know how to remove crank bolt to remove timing cover. please help you need an air impact gun to get ...

What is the correct firing order for a 1988 gmc Jimmy S-15 truck with a 4.3 motor? hi, the firing order is 1,6,5,4,3,2 clockwise rotation on the distributor. number one cylinder on the cap should ...

i have a 85 gmc s-15 v6 2.8 pickup. ive replaced the distibutor,the rotor,coil,timing chain and gears.it cranks but will not start.its getting fuel to the carburator also.whats wrong why wont it start

My GMC S-15 needed a water pump so after someone put one on for me they said i still have water leaking .....Where could it be coming from intake manifold gasket.

Size of tires and wheels for 1983 GMC sierra pickup? P235/75R15 on 15" X 71/2" wheels 5 lug

MY TAIL LIGHTS GO OUT WHEN I PUSH ON BRAKES ON 1985 GMC S 15 Usually a bad ground in the wiring for the lights, or a short in one of the sockets.

does a 88 gmc s-15 have a fuel pressure regulator? does the throttle body injected 2.8L V-6 in a 88 GMC S-15 have a fuel pressure regulator? yes any high pressure fuel pump needs this

I have a 1988 GMC S-15 Tech 4 motor it fires but will not crank and run! I've changed plugs , plug wires, distributor, cap, rotor button ,relay&new battery! What could be the reason it won'