2000 gmc jimmy 4x4 snise on left front My left front weel (driver side) is makeing a squeaking noise while driving, when the thuck is in park and you shake the truck same noise. I changed everthing on
Are the upper control arm bushing pressed in or can i replace them myself...thanks for the help. Also can i replace the lower control arm bushings myself as well? pressed in but can be removed by ...
knocking noise hi there why does my car make like a knocking noise from the right hand side wheel . The CV joints may have gone bad and needs to be replaced, the other thing that would cause a ...
how to replace uper lower control arm bushings in a 2001 gmc jimmy The control arm must be removed from the vehicle. Then the control arm bushings are pressed in and out with a ball joint press. ...
...are not closing right. I have to lift upon the doors to get them to close Sounds like the pins and bushings on the door hinges are worn. This could be a project that you can tackle with the help of ...
DRIVER DOOR IS SAGGING The first thing you need to do is to check the hinge pin bushings to see how worn they are. S-10s/Jimmys are notoriously bad on hinge pin bushings and hinges, and after a while,
how to replace door hinge pin and bushings DO ONE AT A TIME DRIVE THE PIN OUT AND THEN MOVE THE DOOR AROUND A PULL OUT THE BUSHINGS NOTE TWO SIZE BUSHING PUT THEM IN THE RITE HOLE DO THE SAME FOR THE ...
Question about 2001 Jimmy
on a 2001 gmc jimmy lines coming from box mounted on left rear quarter panel what is it i am replacing rear spring shackle and bushings, i need to heat upper bushing in frame to remove old bushings ...
how to remove door bushings i need to remove bushings from my door to put new ones on The only door bushings I am aware of are the ones on the hinge pins. Correct? If not, please clarify what you mean
Question about 2000 Jimmy
how do i replace the upper control arm bushing on my 2000 GMC 4wd jimmy blazer iv got it off just need to put the new one back on what is the easiest way of doing this? Use a C clamp type bushing tool
Usually answered in minutes!
1,363 Questions
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions
