Questions & Answers for: Dyson bush 15 4

Question about DC07 Animal Bagless Upright Cyclonic Vacuum

1 Answer

dyson dc07 motor sparks Hello, recently the belt snapped so replaced with new dyson belt, now since i fitted it the rollers turn as normal but straight away lots of sparks are coming from the motor so

Ad

Question about DC14 All floors Bagless Upright Cyclonic Vacuum

1 Answer

High pitched sound when vacuum is on It seems to pick up fine except I hear a loud high pitched sound when it is running. You may be loosing your bushings on the motor,if this is an expensive machine ...

Ad

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Cleaner cuts out after 10-15 minutes, have washed both filters. Machine cuts out after 10-15 minutes. Have washed both filters. there will be safety relay(OLR) check the settings and increase the ...

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

vacuum shuts off after about 10 to 15 minutes after resting for about 5 or 10 minutes it will go again for about 15 minuutes. I have cleaned it , doesn't help there is a moving part, like a bearing ...

Question about 909592-05 DC-15 Roller Brush Beater Bar

1 Answer

my dc-15 bush bar will not work Head motor blown, will have to take it to your nearest good hoover repair centre should cost around 49 dyson will charge 73

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

eureka maxima heats up and shuts down after 10-15 minutes use?? It works again after it cools down. but only for 10-15 minutes sounds like you have a clog some where or need to replace your filters. ...

...if there is a pin or screw on the side that is missing to stabilize the bar. There are usually 2 bushes on the end of the brush bar, which are shaped so they can only fit in one way. They have a ...

Question about DC25 All Floors Bagless Upright Vacuum

1 Answer

Bush bar only working on hard floor Have you ever replaced the belt? If there is too much friction and the beater bar is no longer rotating, you may only need to replace the belt. You shouldn't have ...

Question about DC14 Animal Bagless Upright Cyclonic Vacuum

1 Answer

how to replace the bushings it makes a lot of noise Check the brush roll area closely. There is probably something in there causing the noise. It could be the clutch or the brush roll.

Question about DC14 Animal Bagless Upright Cyclonic Vacuum

1 Answer

New Dyson cordless received today is very hard to push on rugs. Suggestions??? it is because it has very good suction. rugs are harder due to being closer to the bushes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dyson Vacuum Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...