...this very quick clicking sound on the passenger side. I checked the fuses and they are good. The bulbs still work. The brake switch works cause the third brake light goes on. And seeing as I am ...
...bulb socket side, it is a round shaped piece of plastic about the size of a nickle. There is a socket in the middle, and the miniature lamp bulb pushes down in to install. Looking at the backside, ...
How do I replace the front turn signal bulb in my cadalic srx First do not take it to a dealer. They will charge you $290. They will claim that they have to take the front bumper off. 1. Loosen the ...
out, minutes after I replace it. the blinkers, tail lights, and all other electrical work fine. the bulbs are good. Hazard lights haven't worked right for a while....could this be related? How do I go
Bulb Size Guide Low Beam Headlight Bulb Size: 9006 High Beam Headlamp Light Bulb Size: 9005 Parking Light Bulb Size: 3157 Front Turn Signal Light Bulb Size: 3157 Rear Turn Signal Light Bulb Size: 3057
...add another fuse. Try the dashlights again, if it stays on... then you have a need for new peanut bulbs for the marker lights. If the fuse blows again, then try pulling the lights on the dashboard ...
...size Blazer, it should be a 20 Amp fuse. This fuse also powers your cigarette lighter, so check there also for a problem. If you have an S-10 Blazer, it should be a 20 Amp fuse. This fuse also powers ...
...bulb holder will swing from the right hand side and will then fall out. All you need is a medium size flat head screw driver. You have to unscrew the housings with a philips screw driver and take the ...
Question about 1996 Blazer
Bulb size for the light that goes under the hood of a 1996 Chevy blazer What you need to know is the lamp type and you can find that out at any auto parts store.
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions
