Brake lights don't work on 1983 yamaha ventura. I replaced the two bulbs, checked the fuse, and i have power to one of the wires that goes to the foot pedal "rear brake switch". Any more ideas would ...
how do you remove the headlight bulb im changing the headlight bulb ,any suggestions how to make it easier thanks Randy 1. Remove headlight unit 2. Disconnect headlight leads 3. Remove bulb cover 4. ...
My turn signals and emergency flashers quit and the signal fuse is good Help? okay...the signal fuse powers horns, dash indicator lights (neutral, OD etc) so all that is working fine? the other common
...Hi, Anonymous if you have a dash or instrument light that is out and you have confirmed that the bulb is good then you need to do some quick diagnostics all you need is a test light and a wiring ...
fitting a headlight bulb on Yamaha Neos Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair not for a mere $0 you can download another one. For more ...
need to change the head lamp the bulb how is this done? my high beam is out. need to take the front of the light off should be a couple of screws on either side towards the bottom
...headlight can't get headlight out Hi, Anonymous get a pair of needle nose pliers and break the bulb then grab the socket with a twisting motion and pull it out for more information about your ...
Question about 2009 Royal Star Venture
When I turn on my left or right turning signals, both front signals flash at the same time. Emergency flashers work fine as do the rear turning signals. This could be tricky. Make sure you have the ...
Question about 2007 Royal Star Venture
2007 Yamaha Royal Star Venture passing lights don't work bulbs check good, can't find a fuse for them Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you ...
Usually answered in minutes!
86 Questions
59 Questions
44 Questions
34 Questions
22 Questions