Questions & Answers for: buick ignition module

...buick park ave runs rough and cuts off while idling.It has new parts such as ignition coil pac,plugs and wires,all sensors,control module,fuel filter.Now im stuck cause i still dont know what the ...

...ignition module got a buick le sabre, '92. need info on installing a ignition module Unscrew the ignition coil(s) from on top of the module...(leave plug wires attached)....and set aside noting coil ...

...ignition module. 1995 buick lasabre loosen 7mm bolt retaining wiring harness connector to ign. module remove the three nuts on underside of ignition module to the bracket i think they are 12 to 13 mm ...

...ignition control module located on a 1990 buick lesabre For 1990 Buick Lesabre 3.8L FI OHV 6cyl the Control Module-Ignition is located: Under hood, passenger side, front engine area, mounted on upper ...

buick lasabre, no power to one of the ignition coil packs You have 3 individaul coils each one sits on the ICM(ignition control module). Now if there is no power to one of the ignition coil pack youll

buick regal ignition modulator take the negative cable off the battery,unplug the plugs relaled to the ignition module.remove the ignition wire from the coils ;remember where they were removed from so

...Buick LeSaber coughed sputtered and died. It won't restart. replaced ignition module. It still won't start. What could it be? Replaced the fuel pump a while ago, just replaced ignition module. Still ...

...Buick lesabre keep shutting off and sometimes it want start back up for a few mins. And it also backfires and skip ignition module or controll board problem bad coil or ignition module most likely. ...

...ignition voltage' C0036 BUICK Code Left Front Wheel Speed Sensor Circuit ... https://www.autocodes.com > c0036_buick May 2, 2018 - The Wheel Speed Sensor (WSS) receives ignition voltage from the ...

...Videos on replacing the ICM. https://www.google.com/search?q=2003+Buick+Rendezvous+ignition+control+module+replacement