Questions & Answers for: Canon imagePROGRAF bubble tube

...prevent the unit from correctly reading the sensors on the printhead. Just a thought. are there air bubbles in the ink tube lines? is your printhead draining ink onto the paper? Most likely you need ...

w7200 plotter - the ink tubes are empty My W7200 plotter printhead has no enough ink. The tubes are empty, or with a few ink in. The printhead is writting only with the remainted ink now. The ink ...

After cleaning I am getting an E02813 error. This After cleaning I am getting an E02813 error. This is after printing a good print, then an automatic cleaning, then the error. What is the solution. ...

error 03130031-2f 1f ipf 6100 If you are lucky- air bubbles in the ink lines to the printhead(s) - which you can draw out using a syringe. If you're UNLUCKY it's the purge unit, and it has to be ...

hardware error 03800500-2f41 error 03800500-2f41 ipf 750model Error 03800500-2f42 ipf 750model The possible caused can be fix if you are doing this action : Check the ink tube unit and surrounding ...

How do i clear ink tube of bubbles? I have an IPF8000 printer and I am having problems just one of the 12 channels... the "Blue" is not consistantly flowing through, it is not the printhead as i have ...

How do I check for bubbles in the ink tube? I have an IPF8000 printer and I am having problems just one of the 12 channels... the "Blue" is not consistantly flowing through, it is not the printhead as

How can i stop this leaking during the warm up or initialization process? I have been trying to fix ink leaking problem with canon ipf 760 format printer which I continuously replacing about 3x Mate ...

I have a Canon IPF670 its showing a replace parts warning for SP1 : W1 which is the ink tube unit how do I go into service mode and reset this to remove the replace parts message? I got the printer ...