Questions & Answers for: brothers printer wrinkles paper

...printer wrinkles paper. I have replaced and removed toner cartidges tono avail. Try checking the fuser unit inside the back of the printer. Open the door and pull the paper path tray down. You should ...

...paper This printer has been working fine for several years but now occasionally will bunch up the paper in the feeder and we have to reach in from the back and pull out the wrinkled up paper. Any ...

Brother mfc 6800 printer is not taking the paper my printer is not taking the paper in a st. line. It wrinkles on right side Check the paper path for obstuctions.

printer and pull open the paper path tray you will see an orange colored roller. If this roller is wrinkled even just a little it will wrinkle the paper. I purchased fuser roller units for my 5240 and

wrinkled jammed paper My printer randomly jams and wrinkles the paper no matter what weight paper I use, except for Intuit check forms. Can you remedy? paper weight to light change it.

wrinkles are from the pressure roller in the fuser....it's toast! I've seen cases where the paper width levers in the back of the machine aren't both set to the same number. If you open the back cover

FIRST printed page is quite wrinkled, the rest are fine If I print a single page, it is always wrinkled. If I print more than one page all at once (multiple copies of a page or a multi-page document) ...

...Printer and it started wrinkling each page that it prints out. It occurs in the front left corner of the page. I have taken apart most of the machine and didn't find a piece of paper stuck in there ...

Envelopes are getting wrinkled when run through the Brother DCP 9040CN. How can I prevent them? Unfortunately when feeding envelopes it is quite common for them to wrinkle a little simply because of ...

...printer that WILL cause wrinkling/creasing of the paper. So most likely, yes you are going to need to replace the fusing assembly. Part# LU0214001K About a $179.00 The vendor I use is ...