...paper my printer wrinkles paper. I have replaced and removed toner cartidges tono avail. Try checking the fuser unit inside the back of the printer. Open the door and pull the paper path tray down. ...
Brother HL 1240 laser printer eats paper This printer has been working fine for several years but now occasionally will bunch up the paper in the feeder and we have to reach in from the back and pull ...
Question about MFC 6800 All-In-One Laser Printer
Brother mfc 6800 printer is not taking the paper my printer is not taking the paper in a st. line. It wrinkles on right side Check the paper path for obstuctions.
...brother hl-5250dn printer is spitting out very wrinkled paper It could be the fuser unit. If you open the door on the back of the printer and pull open the paper path tray you will see an orange ...
wrinkled jammed paper My printer randomly jams and wrinkles the paper no matter what weight paper I use, except for Intuit check forms. Can you remedy? paper weight to light change it.
Question about MFC-8460N All-In-One Printer
PAPER WRINKLE AND BLACK SPOTS ON THE RIGHT SIDE OF THE COPY Paper wrinkle and black spots on the right side of the copy, this never happens before (we are using the same paper) drum has some stains ...
Question about HL 5250DN Laser Printer
...wrinkled, the following pages are fine. What does it do different for the first page that it doesn't do for remaining pages? Hello sir;Try to print one page, when the paper process half way then stop ...
...Brother 5250 DN Printer and it started wrinkling each page that it prints out. It occurs in the front left corner of the page. I have taken apart most of the machine and didn't find a piece of paper ...
Brother DCP 9040CN. How can I prevent them? Unfortunately when feeding envelopes it is quite common for them to wrinkle a little simply because of the way envelopes are folded. The paper is thicker in
...Brother 8660. All the copies come out severely wrinkled and creased. There is an error message on the screen that the fuser should be replaced. How do you determine if the fuser is bad and would this ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions