Questions & Answers for: Mazda Protege broken stem

Blue Smoke on starting, and also straining uphill Mazda Protege From all indications in reading your articles I need to replace my stem seals, on my 2002 Mazda Protege. I have gotten a huge range in ...

Ad

Question about 2002 Protege

1 Answer

Broken Bucke (safety belt) What is the best solution for fixing a driver's-seat broken buckle on a 2002 Mazda Protege DX? check the recall list for auto, take it to a dealer and tell them problem, a ...

Ad

...the stem. The center hub nut will not budge. What can I do to get the nut loosened and remove it to get the broken stem off? the nut is a self locking nut that will come off with a 1/2" impact ...

Question about 2000 Protege

1 Answer

...I parked the car at office. After an hour I saw lots of oil appearing centre of engine Check for broken gaskets on the bottom and the top of the engine. Make sure your oil filter is not broken, ...

heater hose is broken / the part the attaches to the tube coming out of the firewall also.... appears to be seperate peices?? what is this tube and peice? is it custom fitted? Sounds like you have a ...

Question about 1997 Protege

1 Answer

Hi there just replacing the cambelt have got the crank at TDC but where r the marks on the camshafts surpost to go?? thanks Very closely examine the engine block in the area immediate to the perimeter

Question about 1997 Protege

1 Answer

when the piston comes up to the top it will hit them causing major damage like broken pistons bent valve stem, if this happens you may need a new or reconditioned engine.....hope this helps.....cheers

My exhaust is coming out at the front of the car not the rear it is broken where the flange is. The pieces that hold the donut in there with bolts are broken off. Do you mean broken off and stuck ...

I HAVE A 2003 MAZDA PROREGE ...I PURCHASED IN NEW...I,VE TAKEN GOOD CARE OF IT THRU THE YEARS...IT,S STARTING TO SMOKE WHEN I START IT UP IN THE MORNINGS FOR ABOUT A MINUTE THEN THE SMOKING ...

...drive and bring RPMS UP and then let off. If you see the motor move excessively then the mount is broken on the side that lifts up. Put it in reverse and do the same. both mounts can be broken and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...