Questions & Answers for: broken door strike

...BROKEN DOOR STRIKE LOCATED ON THE DOOR ITSELF IF THIS IS BROKEN IT WILL NOT ACTIVATE THE SWITCH. I CAN GET THE DOOR STRIKE PART NUMBER, BUT I WOULD REQUIRE A MODEL NUMBER. THE LAST POSSIBLE SOLUTION ...

Ad

...may be out of alignment or the latch is bent or broken, and will have to be replaced. Hopefully it is simple, sounds like the door latch assem.--or the "catch" is either broken or out of ...

Ad

Question about 1999 Beetle

1 Answer

door latch is broken and is blocking the strike from going in (is the strike broken on the door?). It is also possible that the controller is activating the door latch constantly for some reason. Best

Question about GLTF2940ES Front Load Washer

1 Answer

...door strike is broken, I've seen a few break before myself. If you replaced the door latch assembly and its still doing it, and the door strike isn't broken then it said your control board is ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...door strike seem to be broken and is that what you see inside of the latch asm.? if no the strike is ok i suspect the latch itself has broken apart and your seeing a internal part of it through the ...

Question about ATF6000ES Front Load Washer

1 Answer

...DOOR STRIKE IS BROKEN, WILL REPLACING IT FIX MY WASHER OR DID IT BREAK BECAUSE OFSOME OTHER ISSUES WITH THE DOOR? 1) replace is matter easy and will resolve your problem try it.you can buy any parts ...

Question about ATF6000ES Front Load Washer

1 Answer

...door lock is broken, replace it. Enter your model number to see parts for your dishwasher. Help me find my model number Door Latch If the door won't latch, the door latch assembly might be defective. ...

...door lock is broken, replace it. Enter your model number to see parts for your dishwasher. Help me find my model number Door Latch If the door won't latch, the door latch assembly might be defective. ...

Question about 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

1 Answer

...plastic arm attached to the door switch--I see MANY switches with the arms broken in-half or the strikes/catches damaged from slamming. Usually a relatively simple repair to replace the

Question about WF328AA Front Load Washer

1 Answer

...door. If it is broken, the lock can't latch it properly--this can happen if the door has been leaned on and is out of alignment--all it takes is one good slam, off center, and the strike can break or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...