Questions & Answers for: broke safety pins

safety.None are the shape you noted. Going by this drawing anyway. I didn't want to take my 550 apart to look for it, But I will if I have to. There is one more pin in the end of the tube magazine. my

...safety switch , i have to wedge something in it Either the pin on the lid has broken, or the switch mounting bracket has broke or the screws losened and the pin cannot push the switch enough. If the ...

...release button on side does not work. Check for something broke behind shifter like wiring or a pin. Shifter should move when you press brake pedal. Maybe the cable to the safety switch got ...

...safety pins might work better see if you can get one on each side and work out the broke off piece. The only real fix would be to take it completely apart, unsolder the jack the power plugs into from ...

broke off. How can I fix? I had a similar issue when my kids mixed rechargeable and regular batteries in the Wii balance board. The acid leaked and the springs corroded. But I figured out a quick fix

the lid safety lock broke off and now there is nothing to lower the pin. Any suggestions. I tried super gluing it but it does not stay. Buy a new lid.

truck wont go into park I see this is kind of old, but it could be the linkage out of adjustment, the park pin broke off or a bad neutral safety switch (park switch).

...broke off. The pin on the underside of the lid MUST push the piece inside the hole on your machine, or else it won't agitate or spin. This is a safety feature common to all washers/dryers and ...

...safety interlock switch for the TS4500, model no. PS-067/B? The shredder has stopped working because the "flap" is not in place because the plastic "pin" on one end broke off; therefore, the flap is ...

...broke off right at the quick release. I've tried pulling the release off to get the blade out but the bearing will not let go of the blade. Any ideas? Use a safety pin (one of the larger, stout ...