Questions & Answers for: brass hinges

Thor PLS 602 broken left door hinge I put a 'piano' strip of brass hinge at the bottom of the door and on either side attached a length of brass chain - just like a drawbridge will last forever

...Any suggestions? If the hinge is plastic spray silicone lub on it,down into the hinge. If it ias brass, put light weight oil like( 3in1) down into the hinge. Wipe off ...

...hinges have pins in them. The pins have bushings in the hinge. If you go down to your local parts parts store you will be able to purchase them. They are brass colored. You will need to unbolt the ...

...hinges are loose making the door difficult to close the brass bushings in the hinge pins are worn replace the parts to regain a perfect closure to your door if not replaced the latch will go bad very ...

How do I adjust hinges on a soft close toilet seat How do I adjust the hinges on a soft close toilet seat that has started to slam? Thanks it does this get used to it. To fix a soft closing toilet ...

PiN, that holds the hinge from the door to the body panel. Look at the center hole, notice a copper/brass bushing, take it off and replace w/ new one! U need 4 pcs. for each door! Hope that might help

...brass Stanley 5/8 round door hinges for satin nickel finish Everbilt brand hinges. Most worked well, eg the door closed into the jamb as before the switch. However, sereval did not due to the rubbing ...

remove everbilt hinge pin i need to remove the hinge pin Support the door , remove screws from one leaf of hinge, use a 1/8" punch and tap the hinge pin from the bottom. If you use grease to reinsert ...

How do I adjust spring loaded hinges? Using a drift punch that fits the hole , place drift into bottom hole. Twist to increase pressure(one hole only. Reposition pin one hole tighter. Repeat to other ...

Door drops the hinge pin has worn out you can buy help kits at the parts stores to repair the hinges they come with new pins and brass bushings