Questions & Answers for: Jeep brakes

Question about 2000 Grand Cherokee

1 Answer

No pressure in the brakes sometimes when you push the brakes there is pressure and the brakes work other times you push the brakes and your to the floor praying the brakes work what could this be? a ...

Ad

...I have adjusted the cable, and the cables to each rear wheel are moving freely. Check your rear brakes and their adjustment. If parking brake is seperate check them also. The brakes have to work ...

Ad

my brake lights wont work when I press the brake pedals, only the center brake light works. The brake lights come on when I turn the lights on. The brake lights wont work when the emergency flashers ...

Question about 2000 Grand Cherokee

2 Answers

brake lights dont work have a 2000 jeep grand cherokee and no brake lights. checked fuses bulbs but have no power to the bulb fuse is good Check the brake light switch, it is down on the brake pedal ...

Question about 2000 Grand Cherokee

1 Answer

diagram for back brakes on a 1995 jeep cherokee sport Brake Shoes REMOVAL & INSTALLATION Fig. 1: Use a brake cleaner to clean the brake surfaces Fig. 2: Using a brake tool, remove the return ...

Question about 2004 Grand Cherokee

2 Answers

...rotors will warp much quicker, always use reputable parts - you get what you pay for 3. dragging brakes will cause overheating and warping - be sure to service your brakes regularly to ensure free ...

Question about 1989 Wrangler

1 Answer

89 jeep brake lights When the brakes are pressed without the headlights on the brake lights work but are dim. When just the headlights are on the brake lights work fine. When the headlights are on and

Question about 1990 Wrangler

1 Answer

jeep brakes bleed my brakes but it wont keep a pedal no leaks It is very difficult to diagnose this problem with the little bit of information you gave. If the brakes are drum brakes check to see if ...

...shoe. The pin allows each lever to pivot independently of the brake shoe. To apply the parking brakes, the hand lever is pulled upward. This pulls the rear brake shoe actuating levers forward,

...shoe. The pin allows each lever to pivot independently of the brake shoe. To apply the parking brakes, the hand lever is pulled upward. This pulls the rear brake shoe actuating levers forward,

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...