Questions & Answers for: brake reverse lights fuse 99

...reverse. My brake lights are not illuminating either You can energise the interlock solenoid, by you give a positive (+12V) lead to the RED and a negative (ground) to the black line at the ...

fuse box location in a 99 land rover discovery where is the fuse box location in a 99 land rover discover? There are two fuse boxes. One in the engine compartment and one under the dash on passenger ...

reverse lights don't work, when brake is applied, both tail lights and brake lights are on. Can somebody help me with this ? Thanks a lot, a lot ! check fuses Check the bulbs for the tail/brake lights

...brake or reverse light work. if i plug fuse back in wait 5 seconds they stop working again. i also have checked all other fuse's with no blown fuse's detected, relay's seem to be fine. i dont know if ...

...brake lights. replaced bulbs. reverse lights working so not fuse. checked anyway, ok. bridged connector for brake pressure switch. still no brake lights. i'm stumped. HELP. does the switch have power ...

...reverse light, just no brake lights. there's a brake light switch o the arm the brake pedal is connected too,it has two wires going to it. hook two wires together if brake lights go on replace ...

2002 landrover discovery td5 break lights an reverse lights stopped working my break lights and reverse lights just stopped working -Check fuse and buld. mai Lor

...brake light bulb on a 1998 Land Rover Discovery LE? 1. Pull out side facing seat or pocket cover. 2. Unscrew fastener and remove access panel. 3. Turn bulb holder anti-clockwise to release. 4. Remove ...

...also when fuse blows the odometer and tachometer and fuel gauge doesn't work as well as reverse lights You can check the reverse light bulbs and see if they are bad/corroded, also check ground

...brake lights stopped working...fuses ok.. The brake light switch is on top of brake pedal arm. Check your bulbs, and connections to the rear lights (unplug harnesses and clean the connectors as well ...