Questions & Answers for: Harley Davidson FXST Softail Standard brake pad anti rattle clips

Question about 2002 FXST Softail Standard

1 Answer

...Brake Pad Pins Following 02FXST HD Manual, I removed brake pads prior to removing wheel to fix a flat. Fixed flat/installed new floating break rotor. Prior to reinstalling rear wheel, I installed new ...

Ad

Question about 2000 FXST Softail Standard

1 Answer

...brake off of the caliper bracket. The pads and the anti-rattle clips remain in the bracket. Set the caliper aside but do not allow it to hang by the hose as this can damage the hose. Do not crimp the ...

Ad

Question about 2002 FXST Softail Standard

1 Answer

...anti rattle clips in the rear brake bracket. In the caliper, you're going to have to depress the piston back into the caliper. I use either a C-clamp or a large pair of slip joint pliers to push the ...

Question about 2000 FXST Softail Standard

1 Answer

...brake pads on 2004 harley davidson fxst Remove the two bolts that hold the caliper into the caliper bracket. Lift the caliper off the bracket and set aside. Do not crimp the hose as this can damage ...

Question about 2003 FXST Softail Standard

1 Answer

...brake to fail to release. Look at the pads and the anti-rattle hardware and see how it all fits into the caliper bracket. Once you know how it goes, replace the pads and hardware. Now, you must ...

Question about 2000 FXST Softail Standard

1 Answer

...pad so that the piston move into the caliper. If you don't do this, you will not be able to get the new pads in. Once you have the piston fully compressed into the caliper, lift the old pads out and ...

Question about 2000 FXST Softail Standard

1 Answer

front brake pads won't release replaced brake lever...now brake pads won't release Try bleeding the brake caliper.

Question about 2000 FXST Softail Standard

0 Answer

MY 2001 FLSTF HAS REAR BRAKE HOWL DURING LIGHT APPLY, WHY GETTING BRAKE HOWL FROM REAR DURING BRAKE WHEN COMING TO A STOP. INSTALLED NEW PADS AFTER THE SEMI METALIC PADS WERE HOWLING ALSO. ROTORS ...

rear brake pads on softail harley davidson 2003 how to replace Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day. Replace rear brakes ...

Question about 2003 FXST Softail Standard

1 Answer

...brake pad using the same orientation as the pad previously removed. Curved portion of pad must face upward. Install pad pins until the pins snap into place with an audible click. Do not fully tighten ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...