Questions & Answers for: Chevrolet Silverado 1500 brake light

...checked relay still no brake lights all others work please help did you check the brake light switch on the brake pedal see if there is power to one side and when you step on it power to the other ...

...96 Silverado, cruise will not come on, tail lights ang turn signals work Check BRAKE LIGHT SWITCH Check the brake light switch it is located on the brake pedal arm.Its like a push button type

...brake light stays on in the dash Typically, worn brake pads won't cause the warning light to come on. Some vehicles have a brake fluid sensor that can cause the light to come on. Also make sure the ...

...brake light switch, if 12 Volts are there going out and coming in while pressing on the brake pedal, your brake lights aren't getting a good ground or there is a break in the circuit between that ...

Brake light dont work. 2006 chevy truck, 4.8L 2wd The brakes lights on my truck will not work when i press my brakes. The tail lights work on the top but the bottom tail lights does not work. The ...

...brake light is actuated by the float in the brake fluid resevoir. When the sensor travels down the light comes on. When the sensor travels or floats in the fluid the light goes off. Check to see that ...

...brake light working the one up top? If not get a brake light switch check fuses and if the is get a head light switch sound crazy but yes and check circuit boards the bulbs pop in and out of look for ...

...brake light switch, changed tali light boards, check ground, Third brake light comes on, has aftermarket trailer wires, brake light indicator comes on the module?????? DID YOU CHECK YOUR FUSE? i have ...

...Brake" light...LOL . Sounbds like you may have a brake light switch that has gone out. In yor owners manual does it show more than one fuse for the brake lights? Most vehicles with a thrid/highmount ...

brake light circuit. Start at the fuse box under the hood and make sure the brake lights fuse is not blown, the terminals are free of corrosion and that the connections are tight. Then check the brake