Questions & Answers for: Jeep brake light

Question about 2002 Grand Cherokee

2 Answers

Brake light problem Without my lights turned on during the day, when i brake, my left brake light does not work. But at night when i run my lights, the left brake light works fine and the right brake ...

Ad

Question about 2000 Grand Cherokee

3 Answers

brake light circuit from amperage overload. If the fuse has failed it will not allow the electrical current to continue to the brake lights. To check the fuse, first locate the brake light system fuse

Ad

...brake light works. The brake lights come on when I turn the lights on. The brake lights wont work when the emergency flashers are engaged. Fuse in the fuse box is ok. I checked everyone. check the ...

Question about 2000 Grand Cherokee

2 Answers

...brake light switch, it is down on the brake pedal lever, you can dis-connect the wire connector at the brake light switch and check for broken wires at the connector, and then jumper the connector ...

...brake light bulbs allow brake lights and turn signals to work, it"s possible both your brake light bulbs are burned out even though your turn signal lights still work. The top brake light still works ...

...brake light should not be possible to be confused with tail lights or signals. Does it come on? If not, then you probably have no brake lights at all, and that is probably because of the bad fuse or ...

Question about 2002 Grand Cherokee

3 Answers

...brake light accuator on your brake pedal. It controlls when the lights come on and go off by how far the brake pedal is depressed. You can find it connected to the metal bracket that is your brake ...

Question about 2003 Grand Cherokee

2 Answers

...brake light won't work but reverse lights and directional signal do. The bulbs are fine as I've moved them around and still no brake light. And coincidentally, the left brake light won't ...

...brake light is not working. Replaced bulb, but didn't need to it is the same bulb that works the tail lights, which still worked. Ugh, 2006 jeep liberty. Someone said it was a brake switch, well ...

Question about 1989 Wrangler

1 Answer

...When the headlights are on and the brakes are pressed the brake lights are not getting any power. Could this be the brake lamp switch? Weak ground or try the brake light circuit board....Good

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...