Brakes work better when the ABS is disabled. Where is the fuse located for the ABS system so I can premently turn it off. You think they work better, when the ABS is disabled the brakes go into safe ...
...1500 with 4wd. I just replaced the two front calipers and pads and driver side rotor. I bled the brakes for hours getting a steady stream of clear fluid yet still no brake pedal pressure. It will ...
2001 Suburban ABS motor staying on after ignition is off I have a 2001 Chevy Suburban and the ABS light is on and the ABS motor will not shut off even when the ignition is off. I have pulled the 70amp
Spongy brakes changed master cylinder, new brakes, rotors and calipers and wheel cylinders and still have spongy brakes. Bled at least 6 times, still spongy. Rechecked all fittings. Original problem ...
Brake pad change? On my 2002 Suburban 4WD with ABS do I need to open the bleed screws on the caliper when compressing the piston? Or is keeping the lid loose on the master cylinder and removing some ...
brake peddle, so it could be that you need to adjust up the rear brakes adjust them out till the wheel locks and then back off 3/4 to 1 turn. if the brakes are in adjustment then supect air trapped in
...brake fluid will need to be watched for overflow. If it is the brake lines you will be servicing - then the system will require bleeding. Safety first! Let me know if you require further info. ...
...brake line(s) or wheel cylinder or caliper.you will have to keep bleeding the brakes all 4 wheels(trucks don`t use bi-directional braking meaning right rear brakes with left front and so on).bleed ...
Usually answered in minutes!
4,236 Questions
3,219 Questions
2,541 Questions
2,307 Questions
2,177 Questions
