Questions & Answers for: bottom plate cleaning printer

...bottom plate cleaning per canon's instructions.Bottom plate cleaning several times removes the line for the most part but it reappears after printing about 20-25 pages. Please help. I have the same ...

black text has white streaks Done cleaning and deep cleaning numerous times. Bottom plate has been cleaned. New black ink cartridge in place. You have to clean the nozzle with cartridge cleaner liquid

...bottom plate around head sprayer. For some CISS (bottle) design, ink will flow to head, and then flow to pad, when printer off. So, you must close respiratory hole at bottle when printer is not used. ...

...bottom plate clean. After performing the bottom plate clean 6 times, it printed two clean sheets, then back to the streaks. I take this printer is not under warranty, have your tried rubbing alcohol ...

...bottom plate, heres how: 1 Make sure that the printer is on and then remove any paper from the Rear Tray. 2 Press the Open button to open the Paper Output Tray and extend the Output Tray Extension. 3 ...

...like you need to perform a bottom plate clean on the printer. If your using XP(other os' mileage may vary, but are similar): Start Control Panel Printers and Faxes Bottom Plate Clean. Hope this

...bottom plate cleaning and printer head re-alignment. All making it worse. Help!! you use a non-orignal ink cartdrige, and you have contaminaded the printer, need to clean inside, if not already

maintenance Click the Bottom Plate Cleaning. If the noise is still there after you clean the bottom Plate. Clean the Roller. And look inside your printer if there is something that blocking the roller

...Bottom plate cleaning As per solution of Mr. Abdul Karim, that's the simple and easiest way to resolve your problem, if that procedure still dont fix your problem i suggest to sent your printer ...

...bottom plate cleaning does not work, when I try to bottom plate clean my printer the paper does not go all the way through so I always get the message no paper in the tray, when there is but it wont ...