Questions & Answers for: Suzuki bosch 2 20 sre

...Bosch) then let your electrician make a retrofit to match the connection of the original . Make sure that the current (amps) rating is the same or a little bit higher than the original. If you can't ...

...sre two common batteries used in keyless entry. Hear are the most common posted below. Style 1: ...

...20 seconds of switching ignition OFF, press and hold both remote control buttons in turn for at least 5 seconds. The driver's door should lock and unlock once. Within 5 seconds of driver's door ...

...times ran this year less than 5 min. check you valves. you shouldn't have to kick it 20 times. a good running motor is a 2-3 kick let me know if this helps if not i'll help till the things is ...

...bosch or ngk or others. the front 2 , control AFR, air fuel mix. the 2 rear are only for CAT testing, if they dont set codes on the rear leave them be. focus on the fronts first. you never said why ...

...2 sensor to buy, PNP (just pull them in, plug and play) or hand wired, you by the much harder hand wired sensors> post maker of new sensor and part number and i can look it up. bosch sensors have ...

...bosch sheet, 2: grab the car schematic, for ECU. (fsm, or alldata, or mitchells) there is your answer. no man as the blue wire color on all car or all suzuki;'s not yet. tell my yours and ill update ...

...BOSCH, if it still fails 430x, bank 2 lazy cat. it is. then the cat is bad. 4:ive found, that if fueling is WAS bad, and i corrected that that driving for 1 day, fast, the lazy cat , heals its ...

i got on my 2007 m50 to go for a ride ,turned the key and get nothing ,fuses sre good Is the battery good? Try the headlight while you crank the engine (I don't know what an m50 is so...) If the ...

...bosch. OEM show 2 front and 1 rear sensor. i am sure S2 is rear of cat. S1 is at the manifold header junction just above. better post your VIN so part can be found and not wrong and post DTC errors ...