code, but, it's something like this- 0x82 DCD 838. Any ideas? When you boot up your notebook, keep pressing F8; this will take you into safe mode. Look down the list for 'LAST KNOWN GOOD CONFIGURATION
...boot up. Error code is (PXE-E61) Media Test Failure Check Cable. I checked the cable and even re-inserted it to the mother board and still get the error code. The front panel led hard drive light ...
...CODE: 08X00F0805 INTERNAL ERROR WHEN TRYING TO INSTALL AN UPGRADE TO WINDOWS VISTA HOME PREMIUM. TECH SUPPORT HAS TOLD ME THAT SYSTEM FILES ARE CORRUPT. PLEASE, WHAT CAN I DO, I'VE TRIED EVERYTHING ...
Dont boot , 3 green light on no LCD didplay after changing the bios battery , this things happened Dont boot , 3 green light on no LCD didplay no beep codes try going to the BIOS setting and load the ...
...boot to the CD, then try booting to the safe mode, removing the drive from device manager then remove the upper/lower filters in the registry then reboot in to the normal mode. ...
CODE WHEN TRYING TO BOOT MY PRESARIO 1200 COMPUTER "0210:STUCK KEY 39". WHICH KEY IS IT OR IS THAT DETERMINED BY THE CODE? I got the 0210 stuck key error on a Lenovo Thinkpad T61, pc would not bootup,
Question about Presario 2100 and 2500 ,NX 9000 Pavilion ZE4000 Ze5000 XT Series Keyboard -AEKT1TPU011 CD-ROM Drive
...bios error after a new install (memory...etc.) sometimes you can boot into safe mode to undo a recent change. if all else fails reinstall...could be bad hard drive boot sector also.....check code ...
...code. If the system is beeping continuously and NOT booting, you have some form of memory or display issue. If it beeps continuously but DOES BOOT, suspect the keyboard. The keyboard cannot be ...
...boot up. You need to install Windows onto the hard disk using the Windows installation CD with the Windows product code that is on the Windows label on the bottom of your laptop. If the Windows ...
...boot the CD-Drive first. For more information please visit HERE. Steps: 1.Insert the Windows 7 OS disc into your CD-drive and restart the computer. 2.Wait for the setup window to appear 3.Press ...
Usually answered in minutes!
3,409 Questions
2,234 Questions
1,799 Questions
796 Questions
724 Questions