Questions & Answers for: bolts tv stand

...bolts in the internal part of the TV so you'll need to remove the back of the TV. You'll need to remove the two clamps that are screwed into the stand as well... You'll need a torx driver to take the ...

...TV. Since bolts for the frame are metal bolts and bolts for the plastic back cover are usually wood-type screws (sharp on the top, wider thread) you can visually tell the one for the stand from the ...

...TV to a stand before putting the stand together. Thanks there are two types of stands, some are wall type which needs to be mounted using rawl bolts, nuts are suppose to hold a stand, some are ground ...

...THEY ARE ONLY APPROX 15MM LONG MY TV MODEL IS PD42B 50BU there is no problem i use the same bolts and it is ok from 2 years ago but for your paceful you can replace with other bolts approx 20 MM ...

...forget the four holes on the bottom of the stand. Remove the five allen bolts on the back bottom of the tv-not the stand. Yank on stand and metal plate slides out with stand. how do i remove ...

...how do I what type of bolt and the exact size to get, should I just go to a hardware store and ask for the 4 bolts? I dont want to damage the TV YES TAKE THE SMALL BOLTS WITH YOU AND GET LONGER ...

6 screws). Then use a 1/2" wrench to loosen the two adjustment bolts on the wings. Straighten the angle on the wings, retighten the bolts, and reinstall the bracket. Then the TV will stand straight up

...in the mounting bolt holes. The entire back and circuit board must be removed to install nuts or bolts and washers from inside the TV to attach a wall mount, unless the same stand bolt-holes are

What size bolts attach tv to stand for Toshiba 37" What size bolts attach tv to stand for Toshiba 37" flat screen You will use the bolts that you take out to remove the base from the tv.

sony kdl-55ex501 stand bolt size? I need the bolt size for the tv stand you to tel me what you want ok you want a tv stand do you need to locate where you can get one or what?