Questions & Answers for: Mitsubishi Montero body

...just changed the plugs on my 2002 Shogun (UK) didn't have to remove the manifold only the throttle body and top half of the air filter housing. Disconnect wiring from throttle assembly, disconnect ...

car runs then stalls. i drained fuel filter. I had the same problem with my 1989 Montero. I had the throttle body serviced and the problem disappeared.

remove body from chassis how do you remove the body from the chassis? To remove the body from the chassis you need to unbolt the body mount bolts, disconnect all linkages such as throttle, shift, etc.

...to know what adjustment you are making. There are two screws that hold it to the throttle body and the TPS is slotted so that you can turn it on the axes. But in 28 years, the adjustment I ...

where is throttle sensor switch located I need to replace it This will be located to the accelerator cable area on the throttle body. Three wires goes to the Throttle Positioning Sensor

...on everything electrical seems to work but will not start this thing was mr faithfull till now any body have any idea what it could be im assuming i set the alarm off can any body help thanks this

...HAD 5 WIRES BUT NEW HAS ONLY 3. I PUT LIVE TO BATTERY AND SWITCHED LIVE TO SWITCH WIRE EARTH TO BODY. yeah this happened to me but sorted it. live to battery for the blue find power anntena wire ...

V6 T3000 need torque specs has throttle body injector 3.0L and 3.5L V6 Torque Specifications air intake plenum 11-14 ft lbs. camshaft bearing cap 14-15 ft lbs. connecting rod nut 37-38 ft lbs. ...

...not at battery,the dimming is caused from a back feed of ground possible.there are what are called body ground straps from battery to body panels and frame.as far as bat or alt advanced auto and

...the engine is cool on a 1997 Mitsubishi montero? heat sensores is grounded so its shorts out to the body of the car sinse body is grounded trase wire from start to ...