Questions & Answers for: Buick Park Avenue body

try to locate body control module on a 94 buick park ave I'am trying to locate the body control module on a 1994 buick parke ave. to replace it. Any help would be much appreciated thank you for your ...

Where is the MAF on 1992 buick park ave Betwen the air filter and the throttle body. The MAF sensor is always located in the air duct between the air filter and the throttle body

...idle after cold start It could be lots of things, one worth checking is to make sure the throttle body is not sooted up excessively. If your mass air flow sensor is not in the throttle body make ...

...for wipers motor too Sounds like low voltage. A bad battery and or the ground connection to the body or the engine to the body is bad. The body control module needs to be checked for codes. Now a ...

...stopped engine. what could this be? start looking for bad grounds, battery to engine , battery to body, engine to body ...

throttle sticks at times ? You probably need to clean your throttle body.The best way to do this is to remove the throttle body from the engine so the back side of the throttle plate can be thoroughly

...idle control valve on 2003 buick park avenue how to repace idle control valve remove the throttle body and then its held in  with 2 screws try and clean the throttle body and valve ...

What does the body control module do As the name implies, it control most of everything electrical related to the body. Complete function list varies from model to model and make to make, but they ...

...car is not running. These lights are actuated only by connection of the ground wire(white) to the body to complete the circuit. The only place these connections are made is at the door buttons and ...

How can I connect five-wire pump harness to four-wire body harness? Recently had to replace fuel pump and it did not come with the updated wiring harness with only the four wire pins; it came with the