Questions & Answers for: Shure body

Shure Wireless Mike no Output Shure ULX1 wireless body pack has good battery but Batt light(red) is on and no channel display or output but backlight is lit. Any suggestions. Check the battery with a ...

...out, even when forced with the head of a screwdriver. How's it done? Thanks About half way up the body you will see a seam. The body with the cartridge and wind screen separates from the bottom

i have a shure ulx2-j1 transmitter the two wires came loose from the body when the head was taken off how do i take it apart to resolder the wires back You will need to obtain a wiring diagram from ...

...should also check to make sure that the wiring isn't broken where the XLR jack is installed in the body and also where the cartridge is wired to the body. First and foremost you should try the mike ...

Shure ULX1 wireless body pack has good battery but Batt light(red) is on and no channel display or output but backlight is lit. Any suggestions Remove the battery and leave it out for a couple minutes

I have a Shure ULP4 with al ULX1 body pack & ULX2 Hand Held transmiter. The ULX1 body pack shows only numbers for the Group frequnecy, the hand held ULX2 has group "E1" and "F1"

frequency lock Shure microphone body pack Instructions on locking are in the User Guide.

I have a SLX4 with wireless SM58 and all is correct. But I have enough and SLX1 body pack and no transmission is possible with SLX4. The SLX light on correctly but no communication with SLX4. Is it ...

Er r1 error message on shure wireless body pack Does the display show something like "E1" or "F1"? See Shure's website at: http://shure.custhelp.com/app/answers/detail/a_id/2818

shure ulx msut have microphone right at your mouth in order to pick up voice Have you got the body pack attenuation switch set to 20dB? Try it on 0dB.