bobbin thread to catch.it is a back loading bobbin,allseemstobe in order except my ability to thread the bobbin Check out these instructions and diagram. Good luck. Paste this link to your Address bar
...thread the bobbin for my machine???? Thanks for any help. Put the bobbin in the bobbin case and slide the thread in the slot. Pull the thread until it goes under the flat spring. Now, by holding the ...
bobbin thread is bunching terribly. There is a loud sound from the bobbin chamber, as if the mechanism is bouncing around??? How can I fix this bobbin issue? More of a sewing question actually a 7470,
Question about 5050 Mechanical Sewing Machine
bobbin thread is taken up too much It is the upper thread which pulls the bobbin thread up. If the bobbin thread is taken up to much, one solution is to loosen the upper thread -- but the upper thread
Question about 5050 Mechanical Sewing Machine
thread breaksneedle may be in backwardsRaise the needle bar to the highest point, then loosen the clamp screw to remove the old needle, place the new needle in the clamp with the flat side to the
...bobbin tension is too loose then adjust the tension screw on the bobbin case clockwise just a little bit until when you hold on to the thread and let go of the bobbin it doesn't fall free. Good ...
...sure to RAISE the presser foot before threading the upper thread. Check that the bobbin is loaded in the bobbin case and it is threaded properly. sewing machine loose bobbin thread Google Search
Question about Activa 130
...Bobbin Tension Understanding Thread Tension Threads If it is the upper tension that is loose and creating "thread nests" under the fabric, the machine is either misthreaded or possibly the thread is ...
Question about Activa 130
bobbin thread up? This would be top tension too loose. FYI--be sure to ALWAYS RAISE the presser foot when threading the upper thread so it will seat properly in the tension disks. If the bobbin thread
Question about Activa 130
...thread (bobbin) is loose check the bobbin thread is properly captured by the bobbin thread tension spring. If you're not sure which thread is loose, test sew with a different color top thread. Other ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions