Questions & Answers for: bobbin tension

bobbin tension have tried all settings for tension for bobbin. thread is too loose in the bobbin. the stitch is fine on top of fabric but too loose underneath the fabric. This is an issue of your ...

...bobbin tension is not correct.The top thread can be easily pulled out after sewing.How do I adjust the bobbin tension? Hi janna have you tried adjusting the top tension first? if you have a drop in ...

bobbin tension Take a look at this post I answered recently; http://www.fixya.com/support/t25809126-bobbin_thread_showing_top_stitching Be absolutely sure that the problem lies with the bobbin tension

...bobbin tension? Generally bobbin tension is the last thing to try to adjust on your machine. Most sewists adjust the bobbin tension ONLY if they are using very lightweight or very heavyweight thread ...

...bobbin tension needs to tightened slightly. HOWEVER, adjusting the bobbin tension is usually a last attempt. It is a sensitive adjustment. I frequently use a lighter weight thread for quilting and ...

...bobbin) tension. Pinch bottom thread (bobbin) between finger and thumb and make a low steady pull. The thread should come off smoothly with moderate tension. If it snags or catches, check the bobbin ...

...bobbin tension spring. If top thread then likely tension too low or uneven feed. This machine has a horizontal spool pin. Be sure spool cap diameter is greater than the spool or try using the ...

tension similar to top thread with tension =4. If bobbin tension is similar to top thread foot up, then likely bobbin thread has escaped bobbin tension spring... reload bobbin per machine instructions

...bobbin thread tension. Be sure the bobbin thread has not escaped the bobbin thread tension spring. If the bobbin thread is in its tension spring, there will some resistance when you pull the bobbin ...