...bobbin tension: if the bottom stitch is loose, tighten the top tension. Hope this helps. It could also be the size needle and thread you are using for a particular fabric. Different fabrics require ...
...bobbin over , put the thread through the lower tension and try it again. The topside stitch is loose either because the lower tension is loose(or non-existent) or the top thread is too tight. ...
...and still have the problem of the bottom stitches loose. What can I do? You don't want to adjust the bobbin tension, you'll want to try adjusting your stitch length, as well as the regulator
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...bottom thread the stitches are too loose? if stitches on top is loose then remove bobbin case and tighten small screw on it. if stitches on bottom of fabric is loose then tighten top thread
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...bobbin, and then stitch an inch or so on the same type of fabric as you're using in your quilt. Check the stitch. If you need to adjust the top tension, make sure the pressure foot is down! Adjust a ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...bobbin thread still is loose and at times skips a stitch. I have cleaned the machine so there is no lint or loose threads. Any suggestions what to do next? Sounds like the machine needs retiming and ...
...bobbin is loose... Where is the bobbin control my bobbin is loose The bobbin spool is loose, the bobbin case is loose or the bobbin stitches are loose?????? If it is the last one - thread the machine ...
Question about Viking 1
...bobbin issues on straight stitch I've had me Bernina Activa 210 for over a year and have been successfully sewing zig zag stitches on a regular basis. Over the last week, I did a lot of ...
Question about Viking 1
...bobbin are really loose. What's wrong? The bobbin case and thread are in correctly but when I sew a row of stitches the bobbin stitches are really loose and sloppy looking. What is causing that? ...
...bobbin stitch lies flat. I don't know if my needle tension is too tight or too loose. Also the bobbin thread is all tangled underneath the fabric like its coming out of the bobbin too much what you ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions