Question about CE4000 Computerized Sewing Machine
...a solution? Im in the same boat.... Search the internet for "Brother error E6." An E6 message appears on the panel Brother E6 ERROR Brother CE 4000 tangled bobbin thread error E6 SEWING IN GENERAL
Question about CS6000i Computerized Sewing Machine
...error. It doesn't occur when reverse sewing though try these suggestionschange the needle rethread the machine top & bobbin make sure to use every thread guidemake sure the bobbin is not ...
...bobbin I get an error e2 on the screen. I had this problem too. What I did was turn the post the bobbin sits on to the left (lefty-loosy) and kept re-booting the sewing machine until the bobbin ...
...error code E7 mean try these suggestion and if none of them work then you'll have to take the machine to a repair shop change the needle and make sure the needle is for the fabric being sewed and is ...
Question about CS6000i Computerized Sewing Machine
...error 1 when ready to sew have changed bobbin & cleaned out all the loose threads & dust was sewing fine then when I had to change the bobbin it keeps saying E1 Assuming your bobbin threading is ...
Question about Artista 640E Sewing, Quilting and Embroidery Machine with Embroidery Module
bobbin error but there is nothing wrong in the bobbin I have cleaned and oiled the bobbin. I have rethreaded the bobbin and the needle. I have confirmed that the bobbin is in the bobbin case correctly
Question about 7466 Mechanical Sewing Machine
...bobbin won't load error code 88. please help! An 88 error code is a generic one. It could mean that the needle isn't moving properly when the machine is turned on, there could be a problem at the ...
Question about 7466 Mechanical Sewing Machine
error message? A: Do the following: The upper thread could be tangled. Remove the upper thread and any loose threads. Raise the pressure foot, raise the needle to its highest position and rethread the
Question about 7466 Mechanical Sewing Machine
error message? A: Do the following: The upper thread could be tangled. Remove the upper thread and any loose threads. Raise the pressure foot, raise the needle to its highest position and rethread the
Error stuck on rewinding bobbin ][ Rewound the bobbin, then took bobbin off spool and threaded machine but window was showing still in rewinding mode. I tried turning off and on and pressing start ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions