Question about GlobalMap 3500C GPS Receiver
boat. One is in the dash and the other up front by the trolling motor. The one in the dash comes on by itself and beeps and the screen flashes. You cannot turn the unit off with just the power switch.
...Boat with an electric engine (Minn Kota E-Drive). The controller (throttle control) has key in it yet when I turn the key to the off position, it stays on. As a result, I cannot charge it as the ...
Boat motor won't turn off ! I have a Yamaha T-8 That runs great but now that I have moved it too another boat I cannot get it to shut off. (It has remote controls) Key nor the kill switch will not ...
...motor out,but does not quickly turn it off like it should.Can some one please give advice. It sounds like there is a short in the alternator or wiring for alternator. You are continuing running with ...
Question about Outboard Motor Boat Bass Fishing Saltwater Base
motor. won't turn over with key was runnig good when shut off by key, 12 hours later engine won't do anything. even the elect choke by key switch does not worknow. Checked battery connections &are
Question about Outboard Motor Boat Bass Fishing Saltwater Base
...motor may not start. Any suggestions will be appreciated. Biill There is a switch in the control box that locks out the start unless you are in neutral. Open the box and put in a new switch,this is a ...
Question about Outboard Motor Boat Bass Fishing Saltwater Base
...motor. what year and model? but all yamaha outboards are shut down by the C.D.I. being grounded by the key switch or the emergency kill switch. the cheapest thing to test or replace is the key switch ...
Question about Outboard Motor Boat Bass Fishing Saltwater Base
...motor on a 92 stingray ski boat. we were out on the lake, I was pulling a skier, when my gauges went kinda crazy. The boat shut off. Since then, when the key is turned nothing happens. It seems ...
Question about Outboard Motor Boat Bass Fishing Saltwater Base
...boat for hrs and shutting down to refuel it will happen again sometimes should I suspect the slave solenoid? how should I troubleshoot this thanks in advance might be a burned spot on the starter ...
Usually answered in minutes!
1,678 Questions
1,343 Questions
1,187 Questions
1,096 Questions
889 Questions