Question about MFC-8440 All-In-One Laser Printer
...edge of the page from top to bottom when printing, What would be the problem? sometimes dirty carona, clean with blue tab on drum, if not then usally it is the drum worn out(expected life 20 000 ...
Question about Stylus RX580 InkJet Photo Printer
...blue painters tape along the edge that you feed into printer. I put 2, one-inch strips along each end. The painters tape easily removes from paper, and there isn't a mess with ink along the folded ...
edge settings in printer tool box are off. 2. print ribbon carriage (blue part you put the ribbon on is bad) 3. Bad ribbon 4. dealer needs to service to calibrate print head temp tulsabiz.net for more
...edge. The text should be printed in gren but it is printing out in blue about 1cm wide. I have cleaned (with wipes) the optics, I have tried a new fuser and belt but the problem is persisting. I am ...
...blue. To tell it print red - it comes out purple. To tell it print green - it comes out dark red. Any thoughts or suggestions? I would say the ribbon is not installed correctly, and needs flipping so ...
Question about PIXMA MP510 All-In-One InkJet Printer
blue fill. Color or B&W same. The printer has determined the quality of the work you are attempting to print to be substandard. This is a standard feature on these printers. Your old printer
...edge it's right along the blue (not over it, just along the left edge of the guide markings on the body of the unit). Pull the paper through and then guide it back so that the lead edge just barely ...
blue sky in all of them, the cyan might run out long before the cartridge life expectancy. Also, don't forget that cartridges are rated in pages printed at 5% coverage. Since a photo is about 25% of a
...edge on all coloured shapes being printed. 3. No red coloured flakes appear if only three colours are used to print out any shapes. E.g. if I print only one red and one yellow or blue circles, I do ...
Question about DeskJet F380 All-In-One Printer
blue toner cartridge out. Give it a shake. Put it the right way up and gently tap the ends to settle the toner. Open the shutter and blow or gently brush along the bottom edge. Close the shutter. Wipe
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
