Questions & Answers for: blue barely appears

...barely make a bit of black sandwiched in there; the far right side of the screen is a little bit blurry, too. I just performed an adjustment with the blue/green/red dials behind my front assembly to ...

...blue barely registers. I have tried adjusting the color both from the OSD menu and from the individual knobs inside the set, both with no results. I'm not afraid of electronics, but i am not a TV ...

...to being barely noticeable on darker colors such as blue. Thoughts? TIA Hi, The first thing i would try to do is clean the corona wire on the drum unit. It might also be a faulty magenta

blue on the perfect focus barely shows its self. Please reply Did you try the manual lense focus in the back? There is a wing nut on it and it's pretty easy to change. You just need someone to look at

...blue screen appears. I can't make out what is on the blue screen because the screen only appears for a second or two. Then it goes back to the the black screen asking me if I want option windows do I ...

...blue line appears where the yellow line should be. When using a green background, the line is filled in with green and is barely visible but can be noticed. What is producing this and how do we get ...

...blue screen would appear stating it ran into an internal problem and would suggest uninstalling any new devices but i barely have any new programs on it. The message would read " if this is the first ...

...blue as in the product pictures. It is dark and barely readable. Dimmer is turned off. Any ideas? I didn't have to connect the illumination lead. If you have the battery wires(yellow) connected, the ...

...blue. The projectors appear to be misaligned. If the error is severe, this is a convergence problem. Convergence ICs are not too hard to change but require good soldering skills. There can be two or ...

...blue screen.. ?? If it is just the power supply their is a fuse that may or may not be able to replace inside it .. but been my experience if their appears to be no power the power supply/motherboard ...