Questions & Answers for: Ford Ranger blow up diagrams

Wiring Diagram for 2005 Ford Ranger XLT Does nayone know where I can download a wiring Diagram for the ignition switch for a 2005 Ranger I have wiring diagram. Respond with your email address or fax ...

Ad

1984 ford ranger keeps blowing the running light fuses. when i let it sit at idle it won't blow the fuses but as soon as i start driving with in 5 mins or so it blows.... any ideas? short in the wires

Ad

Question about 1996 Ranger SuperCab

2 Answers

I keep blowing the 30 amp max fuse. I don't know if it is to the ignition or the fuel pump. look under the top of the power distribution box it has a diagram. The max fuse blowing means you have a ...

Question about 1992 Ranger

1 Answer

...switch but not fuels etc.? Look out under hood on drivers side for a power relay these are known to blow.If its blown it will not allow any power to the ignition system at all.It should be in a fuse ...

...blow the fuse fir tail lights, turn signals, and hazard lights.could be feeding back and shutting off radio also.I personally had this problem with the tail light fuse blowing.I use my truck to plow ...

need heater hoses diagram for 1996 Ford Ranger 3.0 Temp, normal; heater stopped working after engine heads were worked on at Ford Dealer, but I wasn't aware of it not working in time to call them on ...

...blow warm, otherwise--blows cold; both hoses are hot and blower works fine; apparatus behind glove compartment seems to work OK;runs normal temp, and no antifreeze leaking anywhere; I can't decide if ...

I purchased a 4 terminal starter solenoid. A 3 terminal was on truck. This 4 terminal solenoid includes an S and an I terminal. Is the I terminal used on a 1987 Ford Ranger 2.9 V6 4WD? Something is ...

...some pictures? Need pictures. I think my fusible links or solenoid are wired wrong. Something is blowing a link when I turn the key! Ford truck enthusiast,com is a great reference website with

I have a 96 Ford ranger, 2.3 liter. We changed out motor to 2.5 liter and wiring harness and ECM. The alternator isn't charging and keeps blowing fuse. Any suggestions? Hubby says check your ground ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...