...blinking The power light keep blinking, but there is nothing on tv. The light only stops when i remove the power cord. help please. The power light indicates a problem (usually) with an internal ...
...the lamp door. if the power light blinks and the status light is steady red or blinking green, you have a power supply/ballast issue. you may have to send it in for repair. try
Question about XL8U Multimedia Projector
...going to the board because the lights blink. first check the power of your system because if power is not working properly then light blinking.and then the condition of the capacitor on the
Question about Grand WEGA KDF-55XS955 55" Rear Projection HDTV
...power light and then shuts off and has red blinking light. need to know how many time the red light is blinking there should be a pause. 4 blinks is a fan, 3 blinks is the lamp door is not closed 6 ...
Question about TZ43V61 43" Rear Projection Television
...power source overnight, set will click on for couple of seconds, then red light only blinks. If you have sound and no picture, it's time for a new lamp. In the manual check under LED indication, It ...
Question about Aquos LC-37GD6U 37 in. LCD HDTV
...power light is blinking at a rate of one blink per min and the OPC light is off (then there is a CCFL backlight problem) III) If the power light is blinking at a rate of two times per min and the OPC ...
...light to go out then press power. Then if it doesnt power up hold the menu and the Device/input buttons on the set both in together for 5 seconds the light will blink a series of blinks pause briefly ...
blinking power button Toshiba CX36F85 36" TV Blink - Questions - Fixya www.fixya.com > ... > Toshiba > Toshiba CX36F85 36" TV Toshiba CX36F85 36" TV, blink related issues. ... Every brand TV will have
...blinking power light TV will not power on, the power light just blinks about once per second. When I first turned it on, the whole picture was blinking on and off then I lost the picture and sound. ...
light blinks when power plugged in. Changed Power Supply(used but good), no Change, all still blinks. Can unplug main board, completely from PS, backlight still blinks. When I unplug the power to LED,
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
