Questions & Answers for: blind side

Question about 2007 Mechanical Sewing Machine

1 Answer

...side. This is the blind hemming stitch. You'll possibly also have a blind hemming foot to use, which helps with guiding the fabric fold into the machine and keeping it even. As the previous poster ...

Ad

Question about 1418 Mechanical Sewing Machine

1 Answer

...blind hem. It catches the left side on every stitch instead of every inch or so. I looked at your manual at www.singerco.com for free and I don't see where is does blind hemming. It only mentions ...

Ad

Question about 2007 Mechanical Sewing Machine

1 Answer

...side with your blind hem foot guidr running along the top fold and use the blind hem stitch which looks like three little zigzags then one big zig far to the left onto your folded piece taking a ...

...blind? Ibleive its on the left side in the rear of the enigine compartment on yours . It will have a red top to the dipstick with a latching clip . Red is always automatic trsnsmission and yellow is ...

Question about LS2020 Sewing Machine

2 Answers

...side hem edge at the bottom of the Z. The Blind stitch is either three straight stitches then a wide zig zag which swings to the left and catches a little bit of the folded edge, or three small zig ...

Question about LS2020 Sewing Machine

1 Answer

side. This is the blind hemming stitch. You'll possibly also have a blind hemming foot to use, which helps with guiding the fabric fold into the machine and keeping it even. But if not, you should

Question about 1034D Mechanical Sewing Machine

1 Answer

...blind hem foot and fold your fabric into a "z" shape, wrong side upwards and raw edge at the bottom to be trimmed by the blade as you seam.  The folded edge is run against the "blade" of your ...

blind will not open. Roller is stuck but able to pull to one side. Not related to popcorn machines. This is usually a problem with the cord. If one side is coming down but not the other, one cord will

...When using the rope to raise blind, right side of blind goes up normally, but left side lags by six inches. Is there a way to make blind move level? Use the adjuster to make it pull both cords ...

blind in 396V on drivers side. strings are broke, and blind cannot be removed? take it to an rv repair shop or a blind and curtain repair shop it is installed as a unit so removal will be the opposite

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...