Questions & Answers for: black and white Vacuums

black and white wiring along with the reel - just make sure that you're not yanking it and possibly breaking the connectors off. As you lift the entire reel assembly out, you can also remove the white

...black and white smaller wires. Also a light with a black and white wire coming out of it. I am assuming I connect black with other black wires and the white wires with the black wire with the white ...

...black or white) when I put in the CF-1 replacement filter? The white side is filter media and the black side charcoal. The black side should be the side that the air flows out of and the white the ...

...black leads and 1 white lead for switch. Posts marked 1, 2, and 3. 2 black wires to switch powers on. Connect white wire and breaker trips. Where does the white wire go? Both black go to the switch. ...

...white, black, red and green wire. How do I procede? I am commenting on things are here in the u/k not u/s which is not the same but i hope this is of some help.......From the wall black and white ...

white & black to black is the only connection that half *** works. Please provide any other options, its only a switch and should not be this difficult. (maybe its me!!). looking forward to wiring

...black white green how do I wire it to a three wire cable black red white ground the fan also has a light and remote but remote is Brocken want to use it with no remote model number 53530-300 Black to ...

...black and white and green wire. Green is ground white is neutral, black is hot . Should say on the motor either L1 = black wire. L2 = white wire , G = Green wire or it say H = black wire, N = white ...

black dot beside a wire connection and the two white wires will go there. The white wire coming from the lights usually has a double connection and it will go on first and then the white wire from the

...black and white leads had been connected. Assume black goes to black, but white could have pulled out from either of two crimp wire nuts that have white and yellow wires. Look inside the wire crimps ...