Question about Black & Decker Drills
Black and Decker Cordless Drill Chuck stuck in full open position Black and Decker Cordless Drill, Model # CD140G, Date Stamp 20041952. Keyless chuck is wide open and stuck, won't budge. Any remedies?
Black & Decker drill as a result there is a drill stuck in it Try putting a vise grip on the bit,, and a big vise grip or chanel lock wrench on the key lock.. That should break it free.. Good luck
...Black and decker drill open the chuck all the way then look in and you will see the head of a screw take that out . then you need to hold the arbor some how so you can un screw the chuck from the ...
Question about BD12PSK 12-Volt Smart Select Drill
...is stuck. chuck wont open. turns but makes a bit is stuck. chuck wont open. turns but makes a clicking noise the chuck is broken inside if clicking. Ace and True Value stores sell chuck ...
Question about 18 Volt Cordless Drill Driver W/ Charger
...black-decker cordless drill you must open the chuck all the way and the screw is in the back inside the chuck this is a left screw which means its righty loosey and lefty tighty; unlike normal righty ...
Question about 18V Cordless Drill/Driver
...Black and Decker 18 V drill .I opened the bit up to its largest opening and now cannot get it to budge. It is a keyless chuck. thanks, RW The model# iis CD180GS I have had that same issue -- I just ...
...Black and Decker drills when the drill stops turning the chuck spindle locks automatically. All you have to do is grip the outer sleeve of the chuck and turn it anti clockwise to open it. Turn it ...
Question about 18V Cordless Drill/Driver
...black and decker keyless chuck will not close. Model CD120G Try giving the inside a spray with WD40 then try closing the chuck. Check that there is not a left handed screw in the center of the chuck ...
Question about 18V Cordless Drill/Driver
...BLACK & DECKER 3/8" DRILL CHUCK, no chuck screw in chuck Hi- We have instructions on how to remove the chuck listed on our website Q&A. I have included the link. Please use the instructions for ...
BLACK & DECKER VSR 1200 It was My Father's Drill that I First learned how to use a Drill. I Want to Replace the Old Chuck which hasn't Worked Tightening or Looseing Bits. How do I Begin to Replace the
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions