stuck bit in the bench vise and try to tap the drill chuck using a hammer and a flat brass bar resting against the drill chuck, so you don't damage the chuck. Just tap the brass bar to drive the chuck
Question about BD12PSK 12-Volt Smart Select Drill
bit is stuck. chuck wont open. turns but makes a bit is stuck. chuck wont open. turns but makes a clicking noise the chuck is broken inside if clicking. Ace and True Value stores sell chuck ...
Question about BD12PSK 12-Volt Smart Select Drill
...bit is stuck in the chuck of my Bosch drill A bit is stuck in the chuck of my Bosch PSB 750-2RE drill. I can't open the chuck. Help please ! Hello. Wrap a towel around the chuck and use a pipe wrench ...
...bit stuck in my drill and I can not get it out of the chuck How can it be released from the chuck that I can change to an other drill bit. By stuck do you mean that you can not release the chuck? if ...
...bit stuck in chuck Grab the bit and see if it will move in or out of the chuck around a half inch. If the bit will not move at all inside the chuck at all. Lock the bit in a vise and strike the chuck ...
...bit is stuck in chuck Hello, W/D here. Spray some penetrating oil in the chuck alongside the bit. Work the chuck back and forth, attempting to get a little slack in the chuck. Rapping along the side ...
...stuck with a bit in it. The chuck will turn slightly with force, but will not open. Try holding the bit in a vice and gently tap the chuck off of the bit and see it it releases the pressure on the ...
Question about 18v Cordless Drill - P206 18 Volt V
...stuck with a drill bit in it. It won't open back up. the chuck on my new makita drill is stuck with a drill bit in it. It won't open back up. This is caused by tightening the chuck using ...
...bit is stuck and I cannot undo the chuckless mechanism. I've opened up the drill (picture available), but can't see how to remove whole mech either! Any help appreciated, Steve Can not see what model ...
Question about 18v Cordless Drill - P206 18 Volt V
...stuck bit out of my DeWalt dc 895? https://www.youtube.com/watch?v=pNDgV_6k12E Reverse and Forward Mode: Try putting the drill in reverse mode and hit the trigger, then forward mode. If that doesn't ...
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions