Questions & Answers for: bernina 801

Question about Bernina Sewing Machines

2 Answers

...bernina sport 801 machine and need to know I have Bernina sport 801 sewing machine and need to know how old it is and if I oil it and where? You can oil any two metal parts that move togeather or ...

Ad

...bernina sport 801 and the fabri feeder I have a bernina sport 801 and the fabric feeder will not stay in place. There is a small knob on the lower part of the main body under the stitch length lever. ...

Ad

hand wheel will not release on my bernina sewing machine what should I do? Bernina sport 801 If handwheel is difficult to turn manually, it most likely needs cleaning and oiling.

Question about Bernina Sewing Machines

1 Answer

Bernina 801 tension problems I have an old style 801 Bernina that is sewing too loose of a seam. I don't remember it doing that in the 30 years I've had it. What can I check to fix it?

Question about Bernina Sewing Machines

1 Answer

...bernina sport 801 You will probably find the information that you need here: BERNINA Startseite Herzogenbuchsee Info BERNINA Service Tipps Lenco... There's a great deal of information about the ...

Bernina 807 in order to chnage th elong belt ? V-Belt replacement 801/801 Up Machines Only the belt cover needs to be removed for this belt change. This is done by removing the three screws on the end

...Bernina 801 - need instructions for oiling the Bernina 801 The handwheel on my sewing machine is stuck - as suggested, I checked the bobbin rewind and it was turned on - turning it off pretty much ...

...Manual for Bernina 801 need instructions for oiling the... Bernina 930 Record Oil Diagram How do unjam the gears in my bernina 830 Bernina 930 feed dogs won come back up Bernina Sewing Machines

Question about Bernina Sewing Machines

1 Answer

Bernina 801 Remove the right side cover. Loosen the Alan screw above the pulleys that should allow u to remove the belts. Be sure to replace with Bernina belts. After replacement, tighten the belts by

Bernina 801 Sport? If this is the correct machine, to remove the bulb, you need to push up on the bulb and then rotate counter-clockwise. Then pull down on the bulb. This bulb is large enough that you

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...