Questions & Answers for: bent valves

bent valves, remove a plug wire one at a time and see if there is no change in the idle. My guess, one of them isn't going to change anything. That would be the cylinder that has the bent valves in. I

Ad

...bent my valves you could have bent the valves. but not necessarily. Get your timing reset and do a compression test. That wil tell you if you bent a valve. f one cylinder is way lower than the others ...

Ad

they are telling me i have a bent valve after replacing timing belt, i have a horriable roar sound and vibration. 3rd timing belt on this car being a female i am not trusting this solution w/o some ...

How to fix a timing belt and bent valve on a 2004 Dodge Stratus? if the valve is bent the cylinder head has to come off but make sure the valve is bent first because this could run 500 plus to fix

Question about 24 Hp 48" Deck Yard Tractor

1 Answer

My 24hp Briggs and Stratton ohv engine has bent push rods. My 24hp Briggs and Stratton ohv engine has bent push rods on one side. The top valve can be pushed in but the bottom one will not push in. Is

...valves are bent or damaged. I have seen a few UTUBE videos on this same engine wherein the one guy has the valve cover off and is wiggling the rocker arms to see if he has bad valves? He wiggles them ...

Question about 1997 Neon

2 Answers

...lined up the car will run but runs rouf with with tapping in the motor .I would if that could be a bent value. posably could be a miss alignment or bent valve could be a lot of stuff check the ...

Question about 2008 250 EXC-F

1 Answer

...bent valves? No, it wont run with bent valves. If you remove the cams, (This will close all valves) and put air pressure into the cylinder via the spark plug hole (100psi or so.) If you hear air out ...

Question about 2003 VUE

1 Answer

...and fluid to push on the valves, so I doubt it is bent. What you probably have is a bent intake or exhaust valve. If that is the case, the cylinder head would have to be removed to replace the

Question about 2006 Sentra 2.5

1 Answer

...bent valves give me restriction so that my car doesn't rev past a certain RPM or loss of power Bent valves cause no compression in the cylinder. 1 cylinder the car will start but run badly. If it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...