Questions & Answers for: bent pins sd card slot

Kodak 4GB SDHC Memory Card will work with Nikon D3100 camera Yes. The D3100 will work with any SD card up to 2GB in size and any SDHC card up to 32GB in size.

...SD card slot (not using the cable) all is well. Why? My first impression is the transfer rate of the card through the camera firmware is not fast enough. You said SD card an SD card is a much slower ...

...bent pins, one on each end of the connector. If you do find bent pins you can usually straighten them out with a very small screwdriver. Check that the card in the slot is positioned correctly. Keep ...

...SD memory card from the camera and insert the SD memory into an USB memory card reader. Plug the memory card reader into the USB port of your computer, the computer will see this as an external ...

SD Card Door Broken and SD Card not going in Hi My Nikon D3100 SD Card door is broken. Also my card is not going in - it pops out back... Any idea how much would the repair and new SD card door cost ?

...sd card to be stored. I only get a black screen with the photo information of the photo that I have tried three different brands of sd card, formatted them, and reset the camera to original options ...

...sd card card and after that it displays a "card damaged" error. So I decided to buy a new sd card, but still gets the same error message. I got it checked at a "fix all electronic shop" and suggests ...

...sd card card and after that it displays a "card damaged" error. So I decided to buy a new sd card, but still gets the same error message. I got it checked at a "fix all electronic shop" and suggests ...

SD card. If it still doesn't work shine a flashlight into the battery holder to see if any of the metal connectors are bent. The only logical explanation after that if it still doesn't work is

...sd card goes into is bent and I would have to replace it. Can you help The D70 uses CF (compact flash) cards - I hope you are simply misnaming the CF card. But, if you did use an SD card, it would ...