Questions & Answers for: Dell Inspiron bent pins charger

...bent end of the pin under each of the four contact pieces and gently pry them outward. It is my belief that as long as at least one pin gets contact with the charger that it should work. (Some people ...

...charger maybe. If no lights turn on or the fan doesn't spin, try removing the battery and checking the pin connectors. You may have bent one and it is not making a proper connection. Could also have ...

...bent or broken, then the system will be powered, but the battery charger is disabled. If another AC adapter for a Dell D-series is available, see if the issue goes away with diferent adapter. If no ...

...bent or broken, then the system will be powered, but the battery charger is disabled. If another AC adapter for a Dell D-series is available, see if the issue goes away with diferent adapter. If no ...

...bent or broken in the barrel of the connector, the battery will not charge) or the charger curcuit of the motherboard. If the issue occurs on a different AC adapter, then FLash the BIOS to current ...

...bent or broken, the charger is disabled. If possible, try a known good adapter from another D or E Series Dell Portable. If a KG adapter charges the battery, replace the adapter. If it makes no ...

...bent, then the system cannot ID the Adapter. If the adapter is intact then the issue is the power connection on the motherboard. In either case, if the system doesn't ID the adapter the battery ...

...charger circuit is disabled. So replacing the battery will not resolve the issue. If the sensing pin in the center of the power connection to the portable is bent or broken, then replace the adapter. ...

Bent pin inside the 65w ac adapter My 65w ac adapter is plugged in, it's still supplying power, but it is not identifying the charger. there is a pin inside used for some sort of identification. ...

...charge Dell uses a 3 pin charger.. inner ring, outer ring, and center pin. The center pin tells the laptop what the rating of the charger is. Is the pin broken? or bent.. or perhaps the charger is ...