Questions & Answers for: LG bent pins charger

bent pins fooled my phone into thinking there was a "car kit" plugged in. The way I fixed this was by unbending the pins so that they were not touching one another. Be careful while doing this for the

...pins in the charging port are either liquid damaged or bent and touching eachother. with a tooth brush and some NON Corrosive cleaning spray .. try cleaning out the port ... Canned air wouldn't be a ...

...charger it causes those prongs to get a little bent and touch one another. When you adjust them, you break the contact and that's what fixes the issue. If you can't get it right away, keep trying, it ...

...pins in the charger port had been bent, and were touching each other. I carefull straightened the pins so that they were each the same distance apart from each other, then turned the phone on. Phone ...

...charger, disassemble the back of the phone with a small phillips screwdriver and remove the main board. Once the board is out, clean it with rubbing alcohol (preferrably 91% rubbing alcohol) and a ...

...bent over backwards to resolve them. I would recommend this charger and company to anybody. The charger is a universal charger and will charge other cell phone batteries as well. The only con is that ...

...charger goes and there was a little pin that was bent so i took a pair of tweezers and gently moved it back into place and it went back to normal in an instant. this worked for me, but you might have ...

...pins are bent over or bent to the side. This happened on my wifes phone. I found that if I took the data cable and plugged it into the phone on one end and nothing on the other, it would work. She is ...

...pins bent and broken cant charge phone unfortunately the metal encasement around the charging pins came off, unbeknownst to me and I continued to attache the charger to the phone which bent and broke ...

...Charger is OK are any of the pin bent inside the charging port? if so sometimes they can straightend out is there any fuzz or pocket lint? if so you can blow that out with a can of air, if not its ...